If you change the development unit, do the ACC procedure. Hopper cover [A] 4 hooks Release the three hooks first in the correct order Put the head of a screwdriver in the groove gap [B] as shown, and then release the hook. The new drum unit has a front cover and a front joint. Turn the machine power off. Shake a bag of developer and pour it into the development hopper [A].
|Date Added:||2 July 2014|
|File Size:||9.90 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Turn the machine power on.
When you attach the new drum unit to the development unit, remove a front cover and a front joint at savin c2828 and use them for reassembling the new drum saviin and development unit. The new drum unit has a front cover and a front joint. Open the drum positioning savin c2828 [D].
When the development unit is removed from the drum savin c2828, clean the entrance mylar [C] with a vacuum. Follow the correct order. The hook breaks easily. If you change the development unit, do the ACC procedure.
Savin C Yellow Drum Replacement Service
Remove the bushing [A] of the development roller at the rear of the PCU 6. Make sure that the harness [A] is hooked as shown. Drum savin c2828 [A] and Development Unit [B] 8. You must be logged in to post a comment. When reassembling the PCU: The bearing is properly applied with lubricant. Execute the drum phase adjustment with SP twice. Rotate eavin development roller [A] five or savin c2828 times savin c2828 the counterclockwise direction.
The steps below included directions for both replacement procedures.
Savin C2828 Toner Cartridges – MP C2800, MP C3300 Cartridges
asvin Open the front door. Entering SP Mode 1. Enter the Service Mode. Hopper cover [A] 4 hooks Release the three hooks first in the correct order Put the head of a screwdriver in the groove gap [B] as shown, and then release the hook. Turn the machine power off. Pull out the PCU hold the grip savin c2828 you pull it out.
Majority of print quality problems are related to parts of the drum unit. Do not let metal objects touch the development sleeve. Lever lock [A] savin c2828. This step removes developer that has stuck to the development roller, which would cause color savin c2828. Do not touch the OPC drum. d2828
Remove the front joint [A] The front joint [D] is firmly set. Savin c2828 the hopper cover hook x 3.
Leave a Reply Cancel reply You must be logged in to post a comment. The machine initializes the developer and resets the PM savin c2828 for the developer. Turn the drum positioning plate lever [B] and the image transfer unit lock lever [C] counter-clockwise.
Keep savin c2828 developer off at both ends of the development unit enclosed in red lines in the diagram. Remove it with a flat screwdriver. Shake a bag of developer and pour it into the development hopper [A].
Otherwise, the hopper cover may be savin c2828.